The Major Mechanisms for Efficient Hybrid Energy Harvesting: Overview and Recent Developments
DOI:
https://doi.org/10.51983/arme-2021.10.2.3136Keywords:
Efficient, Energy Harvesting, Mechanisms, Ambient, Standalone, HybridAbstract
Devastating environmental issues and the cost of replacement of batteries in autonomous low-powered electrical, electronic, and mechatronic systems, the interest in ambient energy harvesting has witnessed steady growth recently. The maximization and utilization of these eco-friendly energies have given rise to efficient hybrid energy harvesting, which involves the combination of two or more standalone energy harvesting mechanisms such as Vibrational, thermoelectric, pyroelectric, photovoltaic, etc. The comparison of the recent development, applications, and challenges of the major standalone and hybrid harvesting mechanisms in both large and small-scale mechanisms are the main emphasis of this article. Also, this review holistically discussed the latest optimal techniques utilized in hybrid energy harvesting mechanisms for the effective performance of systems and to guarantee stable power to autonomous electronics and wireless sensor networks. The study will help research scholars to understand and focus on the high-potential techniques to achieve maximum power from hybrid harvesters.
References
E. O. Torres and G. A. Rincón-Mora, "Energy-harvesting chips and the quest for everlasting life," IEEE Georgia Tech Analog and Power IC Design Lab, 2005.
A. Riaz, M. R. Sarker, M. M. Saad, and R. Mohamed, "Review on Comparison of Different Energy Storage Technologies Used in Micro-Energy Harvesting, WSNs, Low-Cost Microelectronic Devices: Challenges and Recommendations," Sensors, vol. 21, no. 5041, 2021.
S. J. Roundy, "Energy scavenging for wireless sensor nodes with a focus on vibration to electricity conversion," A dissertation, The University of California, Berkeley, 2003.
H. Ryu, H. J. Yoon, and S. W. Kim, "Hybrid Energy Harvesters: Toward Sustainable Energy Harvesting," WILEY-VCH Verlag GmbH, Weinheim, 2019.
F. Yildiz, J. Zhu, R. Pecen, and L. Guo, "Energy scavenging for wireless sensor nodes with a focus on rotation to electricity conversion," American Society of Engineering Education, AC, pp. 2007-2254, 2007.
N. Gure, A. Kar, E. Tacgin, A. Sisman, and N. M. Tabatabaei, "Hybrid Energy Harvesters (HEHs) - A," Department of Mechanical Engineering, Marmara University, 2017.
D. Guyomar and M. Lallart, "Recent Progress in Piezoelectric Conversion and Energy Harvesting Using Nonlinear Electronic Interfaces and Issues in Small Scale Implementation," Micromachines, vol. 2, pp. 274-294, 2011.
Z. Hadas, V. Vetiska, and V. Singu, "Energy Harvesting from Mechanical Shocks Using A Sensitive Vibration Energy Harvester," International Journal of Advanced Robotic Systems, 2017.
N. Bizon, N. M. Tabatabaei, and F. Blaabjerg, Energy Harvesting and Energy Efficiency, Lecture Note on Energy, Springer, 2017.
E. Agency, "World Energy Outlook," IEA report, 2014.
A. Paradiso and T. Starner, "Energy Scavenging for mobile and wireless Electronics," Pervasive computing, 2005.
D. J. Inman and A. Erturk, Piezoelectric Energy Harvesting, A John Wiley and Sons, Ltd., Publication, 2011.
B. D. Youn, H. Yoon, H. Kim, B. C. Jung, C. Cho, and Y. Y. Kim, "Piezoelectric Energy Harvesting Skin and Its Application to Self-Powered Wireless Sensor Network," in Advances in Environmental Engineering and Green Technologies (AEEGT) Book Series, DOI: 10.4018/978-1-4666-8254-2.ch004, 2015.
H. A. Sodano, D. J. Inman, and G. Park, "A review of power harvesting from vibration using piezoelectric materials," The Shock and Vibration Digest, vol. 36, no. 3, pp. 197-205, 2004.
P. D. Mitcheson, E. M. Yeatman, G. K. Rao, A. S. Holmes, and T. C. Green, "Energy harvesting from human and machine motion for wireless electronic devices," 2008.
S. Lee and B. D. Youn, "A new piezoelectric energy harvesting design concept: Multimodal energy harvesting skin," IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, vol. 58, no. 3, pp. 629-645, 2011.
T. Keda, Fundamentals of Piezoelectricity, Oxford University Press, 1996.
D. A. Skoog, J. F. Holler, and S. R. Crouch, Principles of Instrumental Analysis, Florence, KY: Cengage Learning, Brooks Cole, 2006.
F. Yildiz, "Potential Ambient Energy-Harvesting Sources and Techniques," The Journal of Technology Studies, 2010.
M. Lallart and D. Guyomar, "Nonlinear energy harvesting," IOP Conference Series: Materials Science and Engineering, vol. 18, no. 092006, 2011.
H. Kawai, "The piezoelectricity of poly (vinylidene fluoride)," Jpn. J. Appl. Phys., vol. 8, pp. 975-976, 1969.
M. H. Malakooti, B. A. Patterson, H. S. Hwang, and H. A. Sodano, "Zno nanowire interfaces for high strength multifunctional composites with embedded energy harvesting," Energy Environ Sci, vol. 9, pp. 634-643, 2016.
Kholkin, A; Amdursky, N; Bdikin, I; Gazit, E, "Strong piezoelectricity in bioinspired peptide nanotubes," ACS Nano, vol. 4, pp. 610-614, 2010.
Z. L. Wang, "Triboelectric nanogenerators as new energy technology for self-powered systems and as active mechanical and chemical sensors," ACS Nano, vol. 7, pp. 9533-9557, 2013.
W. Tian, Z. Ling, Y. I. Wenbo, and j. Shi, "A Review of MEMS Scale Piezoelectric Energy Harvester," Appl. Sci., vol. 8, pp. 645, 2018.
T. Takenaka, T. Okuda, and K. Takegahara, "Lead-free piezoelectric ceramics based on (Bi1/2Na1/2)TiO3-NaNbO3.," Ferroelectrics, vol. 196, pp. 175-178, 1997.
M. R. Sarker, M. H. M. Saad, J. L. Olazagoitia, and J. Vinolas, "Review of Power Converter Impact of Electromagnetic Energy Harvesting Circuits and Devices for Autonomous Sensor Applications," Electronics, vol. 10, no. 1108, 2021.
H. Fang, S. I. Hassan, R. B. Rahim, and M. F. Malek, "A study of vibration energy harvester," 2015.
E. Bell, "Cooling, heating, generating power, and recovering waste heat with thermoelectric systems," Science, vol. 21, no. 5895, pp. 1457-1461, 2008.
A. Gupta, J. A. Jendrzejczyk, and T. M. Mulcahy, "Design of electromagnetic shock absorbers," International Journal of Mechanics and Materials in Design, vol. 3, no. 3, pp. 285-291, 2006.
Y. Suda, T. Shiiba, and K. Hio, "Study on electromagnetic damper for automobiles with nonlinear damping force characteristics road test and theoretical analysis," Kanagawa, Japan, 2003.
J. J. Hollkamp, "Multimodal passive vibration suppression with piezoelectric materials and resonant shunt," Journal of Intelligent Material Systems and Structures, vol. 5, pp. 49-57, 1994.
K. Huang, F. Yu, and Y. Zhang, "Active controller design for an electromagnetic energy-regenerative suspension," International Journal of Automotive Technology, vol. 12, no. 6, pp. 877-885, 2011.
T. E. Starner, "Powerful change part 1: Batteries and possible alternatives for the mobile market," IEEE Pervasive computing, vol. 24, no. 7, pp. 86-88, 2003.
K. Nakano, Y. Suda, and S. Nakadai, "Selfpowered active vibration control using a single electric actuator," Journal of Sound and Vibration, vol. 260, pp. 213-235, 2003.
G. Zuo, P. Penamalli, and J. Wang, "High efficiency energy generator for harvesting ocean wave and mechanical vibration power," vol. 24, no. 7, pp. 1405-1430, 2011.
B. P. Mann and N. D. Sims, "Energy harvesting from the nonlinear oscillations of magnetic levitation," Journal of Sound and Vibration, vols. 319, no. 1-2, pp. 515-530, 2009.
Q. Li, V. Naing, and J. A. Hoffer, "Biomechanical energy harvesting: apparatus and method," Pasadena, California, 2008.
D. Guyomar, A. Badel, and E. Lefeuvre, "Toward energy harvesting using active materials and conversion improvement by nonlinear processing," IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, vol. 52, no. 4, pp. 584-595, 2005.
J. P. Glynne, M. J. Tudor, S. P. Beeby, and N. M. White, "An electromagnetic, vibration-powered generator for intelligent sensor systems," Sensors and Actuators A: Physical, vols. 110, no. 1-3, pp. 344-349, 2004.
Y. Kawamoto, Y. Suda, and H. Inoue, "Electromechanical suspension system considering energy consumption and vehicle maneuver," Vehicle System Dynamics, vol. 46, pp. 1053-1063, 2008.
C. R. Saha, T. O’Donnell, N. Wang, and P. McCloskey, "Electromagnetic generator for harvesting energy from human motion," Sensors and Actuators A: Physical, pp. 248-253, 2008.
C. R. Saha, T. O’Donnell, H. Loder, and S. P. Beeby, "Optimization of an electromagnetic energy harvesting device," IEEE Transactions on Magnetics, vol. 42, no. 10, pp. 3509-3511, 2006.
G. G. Camila, R. F. Vitor, J. B. Michael, and L. J. Vicente, "Energy Harvesting Using Piezoeletric and Electromagnetic Transducers," 2010.
X. Wu, J. Lin, S. Kato, K. Zhang, T. Ren, and L. Liu, "A frequency adjustable vibration energy harvester," Sendai, Japan, 2008.
Sari, T. Balkan, and H. Külah, "An electromagnetic micro energy harvester based on an array of parylene cantilevers," Journal of Micromechanics and Microengineering, vol. 9, 2009.
S. P. Beeby, R. N. Torah, M. J. M J Tudor, P. Glynne-Jones, T. O’Donnell, C. R. Saha, and S. Roy, "A micro electromagnetic generator for vibration energy harvesting," Journal of Micromechanics And Microengineering, pp. 1257-1265, 2007.
P. S. d. S. Marco, A. F. Jorge, A. S. Jose, P. Ricardo, T. Joao, X. Xiaozheng, and P. F. Edward, "Magnetic levitation-based electromagnetic energy harvesting: a semi-analytical non-linear model for energy transduction," Scientific Reports, 2016.
C. Pedro, P. S. d. S. Marco P. Soares dos Santos, R. André, A. F. Jorge, A. S. Jose, T. M. A. and L. K. Andrei, "Electromagnetic energy harvesting using magnetic levitation architectures: A review," Applied Energy, no. 114191, 2020.
T. Lafont, L. Gimeno, J. Delamare, G. Lebedev, D. Zakharov, B. Viala, O. Cugat, N. Galopin, L. Garbuio, and O. Geoffroy, "Magnetostrictive - piezoelectric composite structures for energy harvesting," J. Micromech Microeng, vol. 22, no. 9, 2015.
B. Yang, "Hybrid energy harvester based on piezoelectric and electromagnetic mechanisms," J Micro/Nanolithogr MEMS MOEMS, vol. 9, no. 2, 2010.
P. Li, S. Gao, and H. Cai, "Modeling and analysis of hybrid piezoelectric and electromagnetic energy harvesting from random vibrations.," Microsyst Technol, vol. 21, no. 2, pp. 401-414, 2013.
F. Khameneifar, "Vibration-based piezoelectric energy harvesting system for rotary motion applications," Simon Fraser University, 2011.
Karthik, S. Ali, S. Adhikari, and M. Friswell, "Base excited hybrid energy harvesting," in 2013 IEEE international conference on control applications (CCA), Hyderabad, 2013.
N. Cook-Chennault, N. Thambi, and A. Sastry, "Powering MEMS portable devices - A review of non-regenerative and regenerative power supply systems with special emphasis on piezoelectric energy harvesting systems," Smart Mater Struct, vol. 17, no. 4, 2008.
Z. Qiang, S. Bojing, L. Zhou, and L. W. Zhong, "Recent Progress on Piezoelectric and Triboelectric Energy Harvesters in Biomedical Systems," Adv. Sci., no. 1700029, 2017.
Y. Zi, J. Wang, S. Wang, S. Li, Z. Wen, H. Guo, and Z. L. Wang, "Effective energy storage from a triboelectric nanogenerator," Nat. Commun., vol. 7, 2016.
T. Zhou, C. Zhang, C. B. Han, F. R. Fan, W. Tang, and Z. L. Wang, "Woven structured triboelectric nanogenerator for wearable devices," ACES Appl. Mater. Interfaces, vol. 6, no. 16, pp. 14695-14701, 2014.
Dhakar, P. Pitchappa, F. H. Tay, and C. Lee, "An intelligent skin based self-powered finger motion sensor integrated with triboelectric nanogenerator," Nano Energy, vol. 19, pp. 532-540, 2016.
U. Khan, T. H. Kim, H. Ryu, W. Seung, and S. W. Kim, "Graphene tribotronics for electronic skin and touch screen applications," Adv. Mater., vol. 29, no. 1, pp. 1603544, 2017.
Z. L. Wang, T. Jiang, and L. Xu, "Toward the blue energy dream by triboelectric nanogenerator networks," Nano Energy, vol. 39, pp. 9-23, 2017.
D. Zhu, Vibration Energy Harvesting: Machinery Vibration, Human Movement and Flow Induced Vibration, University of Southampton UKISBN, ISBN: 978-953-307-438-2, 2006.
Y. Zheng, T. Wang, A. Zhang, Z. Peng, D. Lui, R. Chen, and F. Wang, "Electrostatic energy harvesting device with dual resonant structure for wideband random vibration sources at low frequency," Rev. Sci. Instrum., vol. 87, no. 12, pp. 125001, 2016.
Z. Wen, M. H. Yeh, H. Guo, J. Wang, Y. Zi, W. Xu, J. Deng, L. Zhu, X. Wang, and C. Hu, "Self-powered textile for wearable electronics by hybridizing fiber-shaped nanogenerators, solar cells, supercapacitors," Sci. Adv., vol. 2, no. 10, pp. e1600097, 2016.
C. Chen, L. Chen, Z. Wu, H. Guo, W. Yu, Z. Du, and Z. L. Wang, "3D double-faced interlock fabric triboelectric nanogenerator for bio-motion energy harvesting and as self-powered stretching and 3D tactile sensors," Mater. Today, vol. 32, pp. 84-93, 2020.
R. K. Gupta, Q. Shi, L. Dhakar, T. Wang, C. H. Heng, and C. Lee, "Broadband energy harvester using non-linear polymer spring and electromagnetic/triboelectric hybrid mechanism," Sci. Rep., vol. 7, no. 41396, 2017.
H. Liu, J. Zhong, C. Lee, S. W. Lee, and L. Lin, "A comprehensive review on piezoelectric energy harvesting technology: materials, mechanisms, and applications," Appl. Phys. Rev., 2018.
Q. Shi, T. He, and C. Lee, "More than energy harvesting-combining triboelectric nanogenerator and flexible electronics technology for enabling novel micro-/nano-systems," Nano Energy, vol. 57, pp. 851-871, 2019.
Alwathiqbellah, R. Abdallah, and T. Shahrzad, "Triboelectric energy harvester with large bandwidth under harmonic and random excitations," Energy Reports, vol. 6, pp. 2490-2502, 2020.
V. V. João, S. Vladislav, L. K. Andrei, and P. Marco, "Hybrid Triboelectric Electromagnetic Nanogenerators for Mechanical Energy Harvesting," A Review Nano-Micro Letters, vol. 13, pp. 199, 2021.
H. Zhu, "Thermal energy harvesting from temperature fluctuations," HAL, INSA de Lyon, 2011.
S. Roundy, P. K. Wright, and J. Rabaey, "Energy scavenging for wireless sensor networks with special focus on vibrations," New York: Kluwer Academic Publishers, 2004.
S. Meninger, R. Mur-Miranda, R. Amirtharajah, A. P. Chandrakasan, and J. H. Lang, "Vibration-to-Electric energy conversion," IEEE Transactions on Very Large Scale Integration (VLSI) Systems, vol. 9, pp. 64-76, 2001.
E. O. Torres and G. A. Rincon-Mora, "Electrostatic energy-harvesting and battery-charging CMOS system prototype," Circuits and Systems I: Regular Papers, IEEE Transactions, vol. 56, pp. 1938-1948, 2009.
S. Dalola, "Thermal Energy Harvesting for Low-Power Autonomous Sensors," in Energy Harvesting at micro and nanoscale, NiPS Workshop, Avigliano Umbro (TR) - Italy, 2010.
G. Min, D. M. Rowe, and K. Kontostavlakis, "Thermoelectric figure-of-merit under large temperature differences," Journal of Physics D: Applied Physics, vol. 37, pp. 1301-1304, 2004.
C. Wu, "Analysis of waste-heat thermoelectric power generators," Applied Thermal Engineering, vol. 16, pp. 63-69, 1996.
D. M. Rowe, V. L. Kuznetsov, L. A. Kuznetsova, and G. Min, "Electrical and thermal transport properties of intermediate-valence YbAl3," Journal of Physics D: Applied Physics, pp. 2183-2186, 2002.
Stordeur and I. Stark, "Low power thermoelectric generator-- self-sufficient energy supply for micro systems," in Proc. 16th Int. Conf. Thermoelectrics, pp. 575-577, 1997.
Fleming, W. Ng, and S. Ghamaty, "Thermoelectric-based power system for unmanned-air-vehicle/microair-vehicle applications," Journal of Aircraft, vol. 41, pp. 674-676, 2004.
Wojciechowski, J. Merkisz, P. Fuć, P. Lijewski, M. Schmidt, and R. Zybała, "Study of recovery of waste heat from exhaust of automotive engine.," in 5th European Conference on Thermoelectrics, Odessa, Ukraine, pp. 194-198, 2007.
U. Birkholz, U. E. Grob, M. Riffel, H. Roth, and U. Stohre, "Conversion of waste exhaust heat in automobile using FeSi2 thermoelements," in Proc. of the 7th International Conference on Thermoelectric Energy Conversion, Arlington, VA, pp. 124-128, 1988.
Matsubara, "Development of a high efficient thermoelectric stack for a waste exhaust heat recovery of vehicles," in The 21st International Conference on Thermoelectronics, Portland, OR, 2002.
Nesarajah and G. Frey, "Optimized Design of Thermoelectric Energy Harvesting Systems for Waste Heat Recovery from Exhaust Pipes," 2017.
W. Wang, V. Cionca, N. Wang, M. Hayes, B. O’Flynn, and C. O’Mathuna, "Thermoelectric Energy Harvesting for Building Energy Management Wireless Sensor Networks," 2009.
Nesarajah and G. Frey, "Multiphysics simulation in the development of thermoelectric energy harvesting systems.," J. Electron. Mater., pp. 1408-1411, 2016.
Y. Jeyashree, P. Blessy Hepsiba, S. Indirani, A. Dominic Savio, and Y. Sukhi, "Solar Energy Harvesting using Hybrid Photovoltaic and Thermoelectric Generating System," Global Journal of Pure and Applied Mathematics, vol. 13, no. 9, pp. 5935-5944, 2017.
V. Bielinskas, "Efficiency of Solar energy harvesting," Construction21 in the world, 2012.
W. Sun, N. P. Kherani, K. D. Hirschman, L. L. Gadeken, and P. M. Fauchet, "A three-dimensional porous silicon p-n diode for betavoltaics and photovoltaics," Advanced Materials, vol. 17, pp. 1230-1233, 2005.
Cédric, "The Present and Future use of Solar Thermal Energy as a Primary Source of Energy," IEA, 2005.
V. Ranjan, "Phase Equilibria in High Energy Density PVDF-Based Polymers," Physical Review Letters, vol. 99, pp. 047801-047804, 2007.
Chen, S. Lu, and B. Liao, "On the figure of merit of thermoelectric generators," Journal of Energy Resources Technology, vol. 127, pp. 37-41, 2005.
A. Weddell, M. Magno, G. Merrett, D. Brunelli, B. Al-Hashimi, and L. Benini, "A survey of multi-source energy harvesting systems," in Design, automation & test in Europe conference & exhibition, New Jersey, 2013.
E. R. Center, "Hybrid adaptive ambient vibration energy harvesting," University of Maryland, 2015.
IDTech Ex, "Multi-mode energy harvesting," Energy Harv J, 2015.
V. Challa, M. Prasad, and F. Fisher, "A coupled piezoelectric-electromagnetic energy harvesting technique for achieving increased power output through damping matching," Smart Mater Struct, vol. 18, no. 9, 2009.
Wischke and P. Woias, "A multi-functional cantilever for energy scavenging from vibrations," in Proceedings of PowerMEMS 2008, Sendai, 2008.
M. Khbeis, "Development of a simplified, mass producible hybridized ambient, low frequency, low intensity vibration energy scavenger (half-lives)," 2010.
Y. Eun, D. Kwon, M. Kim, I. Yoo, J. Sim, H.-J. Ko, K.-H. Cho, and J. Kim, "A flexible hybrid strain energy harvester using piezoelectric and electrostatic conversion," Smart Mater Struct, vol. 239, no. 4, 2015.
M. Halim, H. Cho, and J. Park, "A handy-motion driven, frequency up-converted hybrid vibration energy harvester using PZT bimorph and nonmagnetic ball," J Phys Conf Ser, vol. 557, no. 1, 2014.
X. Shan, Z. Xu, R. Song, and T. Xie, "A new mathematical model for a piezoelectricelectromagnetic hybrid energy harvester," Ferroelectrics, vol. 450, no. 1, pp. 57-65, 2013.
Li, C. Zhang, and L. Zuo, "Review of power electronics for kinetic energy harvesting systems," 2013.
S. Chen, J. Sun, and J. Hu, "A vibration energy harvester with internal impact and hybrid transduction mechanisms," in 13th international conference on fracture, Beijing, 2013.
M. Ab Rahman, S. Kok, E. Ruslan, A. Dahalan, and S. Salam, "Comparison study between four poles and two poles magnets structure in the hybrid vibration energy harvester," in 2013 IEEE student conference on research and development (SCOReD), Putrajaya, Malaysia, 2013.
Y. Sang, X. Huang, H. Liu, and P. Jin, "A vibration-based hybrid energy harvester for wireless sensor systems," vol. 8, no. 11, pp. 4495-4498, 2012.
Y. Tadesse and S. Priya, "Multimodal energy harvesting system: piezoelectric and electromagnetic," J. Intell Mater Syst Struct, vol. 20, no. 5, pp. 625-632, 2008.
J. Matiko, N. Grabham, S. Beeby, and M. Tudor, "Review of the application of energy harvesting in buildings," Meas Sci Technol, vol. 25, no. 1, 2014.
M. Larkin and Y. Tadesse, "HM-EH-RT: hybrid multimodal energy harvesting from rotational and translational motions.," Int J Smart Nano Mater, vol. 4, no. 4, pp. 257-285, 2014.
M. Wischke, M. Masur, F. Goldschmidtboeing, and P. Woias, "Electromagnetic vibration harvester with piezoelectrically tunable resonance frequency," J Micromech Microeng, vol. 20, no. 3, 2010.
L. Tang, Y. Yang, and C. Soh, "Toward broadband vibration-based energy harvesting," J Intell Mater Syst Struct, vol. 21, no. 18, pp. 1867-1897, 2010.
A. A. Semsudin, J. Sampe, M. S. Islam, and S. H. Md. Ali, "Integrated Hybrid Micro Energy Harvester Based on Thermal and Vibration Using Op-amp for Biomedical Devices," Asian Journal of Scientific Research, 2017.
T. N. T. Mohamad, J. Sampe, and D. D. Berhanuddin, "Architecture of Micro Energy Harvesting Using Hybrid Input of RF, Thermal and Vibration for Semi-Active RFID Tag," Engineering Journal, vol. 21, no. 2, 2017.
G. Sebald, D. Guyomar, and A. Agbossou, "On thermoelectric and pyroelectric energy," Smart Materials And Structures, 2009.
S. Chamanian, B. Çiftci, H. Ulusan, and A. Muhtaroglu, "Power-Efficient Hybrid Energy Harvesting System for Harnessing Ambient Vibrations," IEEE Transactions On Circuits And Systems-I: Regular Papers, 2019.
S. Bandyopadhyay and A. P. Chandrakasan, "Platform architecture for solar, thermal, and vibration energy combining with MPPT and single inductor," IEEE J. Solid-State Circuits, vol. 47, pp. 2199-2215, 2012.
U. H. Chamanian, S. Pathirana, W. P. M. R. Pathirana, O. Zorlu, O. Muhtaroglu, and A. Külah, "A triple hybrid micropower generator with simultaneous multi-mode energy harvesting," Smart Mater. Struct, vol. 27, no. 1, 2018.
J. Katic, S. Rodriguez, and A. Rusu, "A high-efficiency energy harvesting interface for implanted Biofuel cell and thermal harvesters," IEEE Trans. Power Electron, vol. 33, no. 5, pp. 4125-4134, 2018.
C. Lu, C. Y. Tsui, and W. H. Ki, "Vibration energy scavenging system with maximum power tracking for micropower applications,," IEEE Trans. Very Large Scale Integr. (VLSI) Syst, vol. 19, no. 11, pp. 2109-2119, 2011.
M. Shim, J. Kim, J. Jeong, S. Park, and C. Kim, "Self-powered 30 μW to 10 mW piezoelectric energy harvesting system with 9.09 ms/V maximum power point tracking time," IEEE J. Solid-State Circuits, vol. 50, no. 10, pp. 2367-2379, 2015.
H. Lhermet, C. Condemine, M. Plissonnier, R. Salot, P. Audebert, and M. Rosset, "“Efficient power management circuit: From thermal energy harvesting to above-IC microbattery energy storage," IEEE J. Solid-State Circuits, vol. 43, no. 1, pp. 246-255, 2008.
R. M. Sarker, M. Ramizi, and H. M. Mohamad Hanif M, "dSPACE Controller-Based Enhanced Piezoelectric Energy Harvesting System Using PI-Lightning Search Algorithm," IEEE ACCESS, 2018.
M. R. Sarker, M. Ramizi, H. S. Mohamad, T. Muhammad, H. Aini, and M. Azah, "A Hybrid Optimization Approach for the Enhancement of Efficiency of a Piezoelectric Energy Harvesting System," Electronics, 2021.
S. C. Obilikpa, "Robust H-infinity control of two novel MEMS force sensors.," 1OP SciNotes, vol. 1, no. 024406, 2020.
A. Homayouni, A. Mohand-Ousaid, and M. Rakotondrabe, "Topology Optimization of 2DOF piezoelectric Plate Energy Harvester Under External In-plane Force," Springer Journal of Micro-Bio Robotics (JMBR), 2020.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 The Research Publication
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
