Heat Transfer and Fluid Flow in a Double Pipe Heat Exchanger, Part I: Experimental Investigation

Authors

  • Shreyas Kotian Department of Mechanical Engineering, K.J. Somaiya College of Engineering, Mumbai, India
  • Nachiket Methekar Department of Mechanical Engineering, K.J. Somaiya College of Engineering, Mumbai, India
  • Nishant Jain Department of Mechanical Engineering, K.J. Somaiya College of Engineering, Mumbai, India
  • Pritish Naik Department of Mechanical Engineering, K.J. Somaiya College of Engineering, Mumbai, India

DOI:

https://doi.org/10.51983/arme-2020.9.2.2482

Keywords:

Double pipe heat exchanger, heat transfer, effectiveness

Abstract

Double pipe heat exchangers have assumed importance over the years owing to their simple construction, ease of maintenance and cleaning, and extensive use in applications involving sensible heating or cooling of process fluids. In this present study, a detailed comparison is made between the theoretical results and experimental data of the performance parameters of the heat exchanger. Experiments were performed for 60 ≤ Re ≤ 240 for two different inlet temperatures of the hot fluid, 50°C, and 70°C keeping the inlet temperature of the cold fluid constant at 31°C. Graphs were plotted between various performance parameters such as overall heat transfer coefficient, effectiveness, NTU, outlet temperatures of the hot and cold streams against mass flow rates of the fluid. Lastly, a comparison was done between the theoretical data and experimental results and they showed good accordance with a mean deviation of 10-12%.

References

S. Kakac, H. Liu, and A. Pramuanjaroenkij, Heat Exchangers Selection, Rating and Thermal Design, 3rd ed. CRC Press, 2012.

F. P. Incropera and D. P. Dewitt, Introduction to Heat Transfer, Wiley, 1996.

D. Q. Kern, Process Heat Transfer, 21st ed. McGraw-Hill International Book Company, 1983.

Y. A. Cengel and A. J. Ghajar, Heat and Mass Transfer: Fundamentals and Applications, 5th ed. McGraw-Hill Education, 2015.

S. Sivalakshmi, M. Raja, and G. Gowtham, "Effect of helical fins on the performance of a double pipe heat exchanger," Materials Today: Proceedings, 2020, In Press.

Q. Wang et al., "Coupled convection heat transfer of water in a double pipe heat exchanger at supercritical pressures: An experimental research," Applied Thermal Engineering, vol. 159, pp. 113962, 2019.

S. Ghani et al., "Experimental investigation of double-pipe heat exchangers in air conditioning applications," Energy and Buildings, vol. 158, pp. 801-811, 2018.

M. R. Salem et al., "Experimental investigation on the hydrothermal performance of a double-pipe heat exchanger using helical tape insert," International Journal of Thermal Sciences, vol. 124, pp. 496-507, 2018.

D. Majidi, H. Alighardashi, and F. Farhadi, "Experimental studies of heat transfer of air in a double-pipe helical heat exchanger," Applied Thermal Engineering, vol. 133, pp. 276-282, 2018.

M. A. M. Ali et al., "Heat transfer enhancement of double pipe heat exchanger using rotating of variable eccentricity inner pipe," Alexandria Journal of Engineering, vol. 57, no. 4, pp. 3709-3725, 2018.

M. A. Yassin et al., "Heat transfer augmentation for annular flow due to rotation of inner finned pipe," International Journal of Thermal Sciences, vol. 134, pp. 653-660, 2018.

M. R. Salem et al., "Experimental investigation on the thermal performance of a double pipe heat exchanger with segmental perforated baffles," International Journal of Thermal Sciences, vol. 122, pp. 39-52, 2017.

Z. Iqbal, K. S. Syed, and M. Ishaq, "Optimal convective heat transfer in double pipe with parabolic fins," International Journal of Heat and Mass Transfer, vol. 54, pp. 5415-5426, 2011.

K. S. Syed, M. Ishaq, and M. Bakhsh, "Laminar convection in the annulus of a double-pipe with triangular fins," Computers & Fluids, vol. 44, pp. 43-55, 2011.

L. Zhang et al., "Fluid flow characteristics for shell side of double-pipe heat exchanger with helical fins and pin fins," Experimental Thermal and Fluid Science, vol. 36, pp. 30-43, 2012.

Z. Zhang et al., "Heat transfer enhancement in double-pipe heat exchanger by means of rotor-assembled strands," Chemical Engineering and Processing: Process Intensification, vol. 60, pp. 26-33, 2012.

N. Targui and H. Kahalerras, "Analysis of a double pipe heat exchanger performance by use of porous baffles and pulsating flow," Energy Conversion and Management, vol. 76, pp. 43-54, 2013.

H. S. Dizaji, S. Jafarmadar, and F. Mobadersani, "Experimental studies on heat transfer and pressure drop characteristics for new arrangements of corrugated tubes in a double pipe heat exchanger," International Journal of Thermal Sciences, vol. 96, pp. 211-220, 2015.

J. J. Corcoles et al., "Numerical and experimental study of the heat transfer process in a double pipe heat exchanger with inner corrugated tubes," International Journal of Thermal Sciences, vol. 15, pp. 15-26, 2020.

Downloads

Published

05-08-2020

How to Cite

Kotian, S., Methekar, N., Jain, N., & Naik, . P. (2020). Heat Transfer and Fluid Flow in a Double Pipe Heat Exchanger, Part I: Experimental Investigation. Asian Review of Mechanical Engineering, 9(2), 7–15. https://doi.org/10.51983/arme-2020.9.2.2482